Safety enclosures Sheet steel enclosure from 50 to 1600 A
2 pushbuttons, 22 mm Ø (1 green/1 red):
Identification labels “Start” and “Stop”
1pcs NO/NC auxiliary contacts for pre-break , the 2nd auxiliary contact is optional.
The enclosure has an IP65 degree of protection
Emergency stop button is optional.
Handle indicates clearly position of contacts, guaranteeing switch operation.
COMPLIANCE WITH STANDARDS
• IEC 60947-3
• EN 60947-3
• VDE 0660-107 (1992)
• NBN EN 60947-3
• BS EN 60947-
BUILT FOR SAFETY
Thanks to the dedicated cut-off equipment, the user can operate on the equipment quickly and safely.
A secure enclosure, equipment and fittings adapted to an aggressive and dusty environment.
EASY TO INSTALL
Secure connections and commissioning with a well equipped enclosure.
The technology of the contacts, positioned in parallel on a movable bar, make it possible to check the contacts are correctly separated.
TRIPLE SAFETY HANDLE
It allows the installation to be locked by 3 locks when the switch is in the opened position.
It indicates the real position of all the contacts, with no possibility for error.
This prevents the switch from being closed if the enclosure is open, but also prevents the enclosure from being opened if the switch is closed.